24V FCM-1 Control Module

The NCM-W communication card provides a connection to the Onyx 3030 central fire alarm control panel, the NCA secondary display, the ONYXWORKS graphics software, or between fire alarm control panels in a Noti-Fire-Net network.

The ACS Series ONSX provides LED and switch modules to annunciate status and control fire alarm panels, network controllers, or specific system output circuits.

The FMM-1 module monitors dry-contact devices like flow switches and manual call points, transmitting their operational status back to the main fire alarm control panel.

The SSM24-6 Non-Addressable Bell is a 6-inch sounder operating at 24VDC, with a loud output (~82dB), used for wired fire/burglar alarm systems, featuring polarized design, easy installation, and reliability.

The FRM-1 addressable module provides dry contact outputs to control peripheral devices, enabling activation either manually or via fire alarm control panel programming software.

The FZM-1 conventional detector connection module is used to interface with and monitor 2-wire conventional detectors. The status (on, off, alarm) of a detector zone will be sent to the control panel for monitoring.

The ISO-X isolation module is used in the Onyx fire alarm system to protect the system against short circuits on the SLC loop.

This modern smoke detector meets UL268 standards, featuring dual LEDs for 360-degree visibility, rotary decimal addressing, and anti-interference technology to ensure maximum safety.

The 5601P heat detector is a key component in conventional fire alarm systems for industrial, apartment, and commercial buildings, offering high safety and cost-effectiveness, used where smoke detectors cannot be installed.

Addressable pull stations actively trigger early alarms during emergencies. They provide precise location data to the control panel, enabling responders to quickly reach the alert area.

Features an LED indicator for alarm status (normally the light is off, but turns red when an alarm occurs). Includes a terminal for a room indicator light.

Features an LED indicator for alarm status (normally the light is off, but turns red when an alarm occurs). Includes a terminal for a room indicator light.